U.S. Battery Manufacturing’s RE Series, Renewable Energy Storage Batteries Get An Updated Look

The Renewable Energy industry will soon appreciate the updated appearance of U.S. Battery’s RE Deep Cycle product line. The batteries will feature new labeling with stronger graphics and battery information, but the internal structure and design of the RE Series line will remain the same.

U.S. Battery RE Series deep-cycle batteries are the top energy storage solution chosen by a variety of industries and individual homeowners looking for the most cost-effective method to store energy from renewable solar and wind power systems. The unique components built into the RE Series batteries deliver the highest peak capacity, cycle life, reliability, and improved watt-hours per liter and watt-hours per kilogram.

These include the company’s exclusive Diamond Plate technology, highly efficient synthetic tetrabasic lead sulfate (TTBLS) crystal structures that enhanced performance, charging, and extend battery life. U.S. Battery’s RE-Series deep-cycle batteries also include Defender™ moss shields that effectively prevent the formation of “mossing shorts” caused when positive active material particles dislodge from the plates and collect at the top of the cell elements. Outside Positive (OSP™) battery design, mitigates the effects of positive plate deterioration and further increases battery life, overall capacity, and provides stable performance over the life of the battery.

U.S. Battery RE Series deep cycle batteries are available in 6-volt and 2-volt configurations, both featuring extra heavy-duty connector lugs for extreme power loads, a tough polypropylene exterior case, heavy-duty lifting handles, and the company’s SpeedCap® Venting positive locking system for easy maintenance. An optional factory-installed, single-point watering system is also available.

U.S. Battery manufactures a variety of deep-cycle batteries that are all manufactured in the U.S.A. and are distributed worldwide. For more information, contact U.S. Battery Manufacturing, 1675 Sampson Ave. Corona, CA 92879. (800) 695-0945. Visit https://www.usbattery.com.

Advanced Energy Storage Applications Using Flooded Lead-Acid Batteries

Flooded lead-acid batteries are being used in numerous new and advanced energy storage applications

Flooded lead-acid batteries remain as one of the most cost-effective and environmentally safe ways to store energy. Because of this, many are being used in advanced energy storage applications in large scale to power businesses and residents with solar farms across the United States.

In one example, the Public Services Company in New Mexico (PNM), serves more than 500,000 residents and utilizes solar farms with flooded lead-acid battery storage systems that can deliver 500kW of power. According to PNM, the system allows for stabilized power output during high demand. Batteries are rack-mounted in eight freight containers adjacent to solar panels.

The University of New Mexico and Sandia National Laboratories helped work on the project and has successfully demonstrated peak shaving, smoothing of photovoltaic ramp rates, and minimizing of voltage fluctuations to the satisfaction of PNM.

For more information on deep-cycle flooded lead-acid batteries for solar energy storage, visit www.usbattery.com.

Simple Solar Power Upgrade For Marine Use

This boat owner and blogger pieced together a simple solar system to efficiently re-charge his deep-cycle batteries

Mark McMaster wanted to add a solar charging system to provide efficient power on his 34-foot, 1983 Tollycraft Series II boat, and reduce the need to run a noisy generator and conserve fuel. “We don’t have an onboard generator, and we hate the noise in quiet anchorages,” says McMaster.

TollyBatteryCompartmentBeing in the Equipment Business, especially related to golf courses and parks, McMaster was familiar with battery powered products and 12-volt deep-cycle batteries. “We supplied these machines with a variety of brands of batteries, but hands down, the best overall performance has been with U.S. Battery Products,” said McMaster.

It didn’t take long for McMaster to install a bank of four US2200 XC2 6-volt deep-cycle batteries in 2013 to his boat. Once he decided to go solar, he added a second set of four batteries and began the conversion. McMaster added four 100-watt flexible panels from Amray Solar and attached them to the bimini for the time being. A Victron MPPT charge controller was also used along with LinkPro battery monitor. The system allows McMaster to monitor the system via the Victron app and with the four solar panels, has so far managed to keep the batteries fully charged.

“The system works great so far, beyond expectations,” says McMaster. “We’ll get a better test of the entire set-up once we head out for a two or three-week trip. My only wish is that I should have taken better care of the batteries when I started. I should have performed an equalization charge on them on a regular basis and not let them get down to the 55-percent discharge range. I might replace them next spring and we’ll definitely use U.S. Battery products.”

You can see the entire solar system upgrade and other upgrades he’s made to his boat, on the Tolly Rodger blog: https://tollyroger.com. More information on U.S. Battery deep-cycle batteries for marine and RV applications can be found on the U.S. Battery Manufacturing website at https://www.usbattery.com.

Wiring system and controller for the battery bank.

Wiring system and the controller for the battery bank.

 

 

 

 

 

 

 

 

 

 

Solar panels temporarily attached to bimini.

Solar panels temporarily attached to bimini.